|
Original Arduino® ABX00053 - Arduino...
PEAK 5165
PeakTech® P 5165 - a digital lux meter designed to measure illuminance in different environments.
PEAK 5186
PeakTech® P 5186 - New and practical USB data logger for DC voltage measurement with LCD display. Memory holds 32000 measurement point.
PEAK 1090
PeakTech® P 1090 - two pin voltage tester for DC and AC voltages from 6 to 690 volts for fast, quick and uncomplicated voltage measurements. This model is TÜV/GS tested for specific user safety and features an easy-to-read LCD display with backlight and bar graphs.
PEAK 1095
PeakTech® P 1095 - two pin voltage tester for DC and AC voltages from 12 to 690 volts for fast and straightforward voltage measurements. This model is TÜV/GS tested for special user safety and features an easy-to-read LED display.
PEAK 1096
PeakTech® P 1096 - is a new development for fast and uncomplicated voltage measurements as a two-pole voltage tester with digital LCD display and additional LED display of the current voltage values. This model has been tested by TÜV / GS for special user safety and has an easy-to-read LCD display with backlight for a precise indication of the voltage...
CQDBC
Vention CQDBC - USB 2.0 A/microB cable with TPE jacket, supports 2A fast charging, colour black, length 0,25m. Special adapter for USB-C devices.
KTR 5038
Kitronik 5038 - Monitor, log, and react to gathered sensory data with the Kitronik Air Quality Control HAT for Raspberry Pi.
SHELLY PRO 1PM
Shelly Pro 1PM - is a Wi-Fi relay with single-phase energy consumption measurement, supporting a maximum load of 16 A and mounts directly on a DIN rail.
SHELLY PRO 2
Shelly Pro 2 - is a 2-phase Wi-Fi relay that supports a maximum load of 25 A (16 A per channel). Directly mountable on a DIN rail.
RPI RBLLC
Joy-IT RPI RBLLC - voltage level adapter for Raspberry Pi 400 GPIO interface.
FMM130
Teltonika FMM130 - GNSS and GSM connected positioning head that can collect the coordinates of the device and transmit them via GSM network to a server.
FMM230
Teltonika FMM230 - is a GNSS- and GSM-connected positioning head that can collect the coordinates of the device and transmit them via GSM network to a server. It attaches directly to the battery using the fork connectors included in the package.
PHR-3+JOHTO UROS
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end
WKK 50212PASW
Jacob 50212PASW - Black M12 nuts for cable gland, 100pcs
WKK 50620PA7035
Jacob 50620PA7035 - Light grey plastic cable glands M20, thread length 8mm. 100pcs bag
WKK 50625PA7035
Jacob 50625PA7035 - Light grey plastic cable glands M25, thread length 8mm. 50pcs bag
SEEED 101991067
Seeed Studio 101991067 - Grove Smart IR Gesture Sensor, infrared camera sensor, AI algorithm, over 15 gestures detection, I2C, SPI, support Grove, XIAO, Type-C connecting, 3.3V/5V
WKK 50632PA7035
Jacob 50632PA7035 - Light grey plastic cable glands M32, thread length 10mm. 25pcs bag
WKK 50232PA7035
Jacob 50232PA7035 - Light grey M32 nuts for cable gland, 100pcs
PIM550
Pimoroni PIM550 - Transform your Raspberry Pi Pico into a electronic adventure playground packed with physical computing goodies including an LCD screen, motor drivers, a mini breadboard, and much more!
PEAK 7000
PeakTech® P 7000» Tapping clamps for Digital Multimeter up to 10 A
ARD A000070
Original Arduino® A000070 - The Arduino 9 Axes Motion Shield is based on the BNO055 absolute orientation sensor from Bosch Sensortec GmbH which integrates a triaxial 14-bit accelerometer
PEAK 7005
PeakTech® P 7005 - 2 x 4 mm safety test leads (red/black) with extension
PEAK 4200
PeakTech® 4200 - Current clamp adapter for multimeters 200A AC, ratio 1000:1
PEAK 5200
PeakTech® 5200 - moisture meter for wood and common building materials. Suitable for measuring wood, cardboard, paper, concrete, plaster and mortar.
RPI CRV00113L
Elecrow CRV00113L - CrowView - ultra-lightweight USB-C connected 14 inch add-on monitor that supports laptops with 13-16.5" screen.
PEAK 1031
PeakTech® 1031 - NCV voltage tester for quick identification of live cables and devices. Measuring range 50-1000 VAC.
TSW212
Teltonika TSW212 - managed ethernet switch with two SFP ports and eight 1GB RJ45/Ethernet interfaces
PEAK 4940
PeakTech® 4940 - Infrared thermometer for temperatures from -50 °C to +600 °C.
PEAK 1635
PeakTech® 1636 - Current clamp meter with a 1mA resolution. Particularly suitable for measuring leakage currents and other small currents.
MOT MDDRC10
Cytron MDDRC10 - 10Amp 7V-30V DC Motor Driver for R/C (2 Channels)
PR322EU7
Teltonika PR322EU7 - gigabit single port PoE injector with approx. 18W output power.
OTD140
Teltonika OTD140 - IP55 enclosed, pole-mountable 4G LTE Cat 4 mobile router for outdoor use.
TRB256
Teltonika TRB256 - 4G LTE NB-IoT gateway / mobile router for industrial use. Versatile interfaces including digital I/O, RS232, RS485 and RJ45 Ethernet. Dual SIM for improved connectivity fault tolerance, backup WAN. Comprehensive support for industrial protocols such as DNP3, DLMS, Modbus and others.
SHELLY PLUSPLUGB
Shelly Plug S - Remote WiFi socket with power metering.
RUT140
Teltonika RUT140 - Industrial Ethernet Router with 1xWAN, 1xLAN, WiFi 4 AP/STA connections. DIN rail mounting as standard.
PINECIL-SHTRA
Pine64 PINECIL-SHBLK - PINECIL Replacement Shell
WKK 11952971
WKK 11952971- white cable tie fastener for 5,0mm cable ties with adhesive strip or screw-on with Ø5,7mm fixing hole, 100pcs per bag.
RPI CM4102016
Raspberry Pi CM4102016 = Compute module 4 with 2GB ram, 16GB eMMC, WiFi
VLMP60410O1.00
Nedis VLMP60410O1.00 - This USB cable is suitable for connecting a USB device with a Micro-B connector to a PC and/or charging from a PC.