|
UPS ERA1200
UPS ERA PLUS 1200 SCHUKO TOGETHER ON (FGCERAPL1202SCH) - 1200VA (840W) line-interactive UPS backup power supply with 12V 9Ah battery. Two battery-protected schuko outlets and a fixed mains cable as input connection.
RPI RPD19048A
Elecrow RPD19048A - HDMI 5 Inch 800x480 TFT Raspberry Pi Touch Display with GPIO Backlight Control
KTR 5636
Kitronik 5636 - Kitronik Klimate Environment Monitoring Board for BBC micro:bit
KTR 5697
Kitronik 5697 - Kitronik Environmental Control Board for BBC micro:bit
SEEED 114991131
Seeed Studio 114991131 - RF Explorer Upconverter is a high-performance RF frequency mixer
KEMO M203
Kemo M203 - Master/slave power switch 230VAC/3680W
PKW-SLIM-KAT6 0.15 GN
SLIM® CAT6 Patchcords FLAT design - U/UTP unshielded - 0,15m green
PKW-SLIM-KAT6 0.15 SW
SLIM® CAT6 Patchcords FLAT design - U/UTP unshielded - 0,15m black
PKW-SLIM-KAT6 0.25 RT
SLIM® CAT6 Patchcords FLAT design - U/UTP unshielded - 0,25m red
PKW-SLIM-KAT6 5.0
SLIM® CAT6 Patchcords FLAT design - U/UTP unshielded - 5,0m grey
PKW-STP-SLIM-KAT6 0.1 WS
SLIM® CAT6 Patchcords FLAT design - U/FTP shielded - 0,1m white
PKW-STP-SLIM-KAT6 0.15
SLIM® CAT6 Patchcords FLAT design - U/FTP shielded - 0,15m grey
PKW-STP-SLIM-KAT6 0.15 WS
SLIM® CAT6 Patchcords FLAT design - U/FTP shielded - 0,15m white
PKW-STP-SLIM-KAT6 0.5 SW
SLIM® CAT6 Patchcords FLAT design - U/FTP shielded - 0,5m black
SEEED 113030001
Seeed Studio 113030001 - The NFC Shield includes an integrated PN532 transceiver module that handles contactless data transmission at 13.56MHz. You can read and write a 13.56MHz tag with this NFC Shield or enable point-to-point communication with two NFC Shields.
PKW-STP-SLIM-K6A 0.1 BL
SLIM® CAT6A Patchcords FLAT design - U/FTP shielded - 0,1m blue
PKW-LIGHT-K6 0.5 GE
SLIM® CAT6 Patchcords ROUND design - U/UTP unshielded - 0,5m yellow
PKW-TOUGH-STP-K6 0.25
SLIM® CAT6 Patchcords FLAT design with Nylon sheath - U/FTP shielded - 0,25m grey
PKW-TOUGH-STP-K6 0.25 BL
SLIM® CAT6 Patchcords FLAT design with Nylon sheath - U/FTP shielded - 0,25m blue
PKW-TOUGH-STP-K6 0.25 GE
SLIM® CAT6 Patchcords FLAT design with Nylon sheath - U/FTP shielded - 0,25m yellow
PKW-TOUGH-STP-K6 0.25 GN
SLIM® CAT6 Patchcords FLAT design with Nylon sheath - U/FTP shielded - 0,25m green
PKW-TOUGH-STP-K6 0.25 RT
SLIM® CAT6 Patchcords FLAT design with Nylon sheath - U/FTP shielded - 0,25m red
PKW-TOUGH-STP-K6 0.5 BL
SLIM® CAT6 Patchcords FLAT design with Nylon sheath - U/FTP shielded - 0,5m blue
PKW-LIGHT-STP-K6 2.0 GN
SLIM® CAT6 Patchcords ROUND design - U/FTP shielded - 2,0m green
SHELLY HTB
Shelly H&T black - temperature and humidity sensor, black. The Shelly H&T helps to monitor changes in humidity and temperature while helping to avoid dehydration. Connects to a wireless Wi-Fi network. Can be used in controls and automation with other devices.
ARD SHIELD3AMOTOR
Cytron SHIELD-3AMOTOR - 1.2Amp 7V-30V DC Motor Driver Shield for Arduino (2 Channels)
PR1KCS28
Teltonika PR1KCS28 - Combo SISO Mobile/GNSS/Wi-Fi Roof SMA Antenna is a multi-purpose antenna designed for use with Teltonika routers. The antenna provides a combined single frequency antenna covering mobile, GNSS and Wi-Fi networks.
ADA5477
Adafruit 5477 - Adafruit ESP32-S3 Feather with 4MB Flash 2MB PSRAM - STEMMA QT / Qwiic
ARD AKX00032
Original Arduino® AKX00032 - Portenta Machine Control is specifically designed for industrial applications such as automation, plant control, equipment control and robotics. It is easy to use and its versatility allows the design and implementation of complex industrial applications.
ATTEN MS900
Atten MS-900 - The Atten MS-900 4 in 1 Rework Station is an easy to use, durable and reliable rework station, ideal for electronics repairers and hobbyists. It is designed specifically for professional use and includes many handy features such as precise temperature control, fast warm-up and LED displays for different functions.
WKK 21111040015
WKK 21111040015 - H-2(Z) 2:1 125C 16.0/8.0mm - black heat shrink tube in a box, length 5m
ARD ABX00062
Arduino ABX00062 - The Arduino UNO Mini Limited Edition measures just 26.7 x 34.2 mm, with USB-C as the programming interface and the good old ATmega328P surface mount version as the processor.
WKK 21111142915
WKK 21111142915 - H-1 2:1 105C 1.2/0.6mm - transparent heat shrink tube in a box, length 10m
WKK 21111242915
WKK 21111242915 - H-1 2:1 105C 1.6/0.8mm - transparent heat shrink tube in a box, length 10m
WKK 21111442915
WKK 21111442915 - H-1 2:1 105C 3.2/1.6mm - transparent heat shrink tube in a box, length 10m
WKK 21814421015
WKK 21814421015 - H-2F(YG) 2:1 135C 3.2/1.6mm - yellow-green heat shrink tube in a box, length 10m
TAEHG
Vention TAEHG - USB 2.0 C/C cable with nylon braided TPE jacket, supports 5A and 100W fast charging, colour black, length 1,5m.
W41483
Wiha 00923 - 10 piece ball end hexagon set, Wiha ErgoStar brilliant coloured.
PIM082
Pimoroni PIM082 - Explorer HAT Pro adds a lot of useful tools to your Raspberry Pi.