Seeed Studio 114992048 - Tower structure, RGB LED, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all those combinations make this super radiator for Raspberry Pi 4 / 3.
|
Rigol DHO5108 - uuden sukupolven...
SEEED 114992048
Tällä hetkellä ei saatavilla
Huom: Viimeinen tuote varastossa!
Tulossa:
Seeed Studio 114992048 - Tower structure, RGB LED, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all those combinations make this super radiator for Raspberry Pi 4 / 3.
Jingle bells, jingle bells.
Blink fan, blink fan.
Meet this colorful, shining, blink super Raspberry Pi ICE Tower CPU Cooling Fan!
Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi. In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃. What amazing! Best of all, this cooling fan supports the new Raspberry Pi 4 Model B. In our actual use, we found that Raspberry Pi 4 has a large amount of heat. with the help of this super fan, the powerful performance of the Raspberry Pi 4 will be fully released.
This super fan is designed by 52Pi, 52Pi is a world's leading Raspberry Pi accessories manufacturer, specializing in the design and production of various hats, screens, and accessories for the Raspberry Pi.
Special thanks for ETA PRIME to share this video with us.
In the heat dissipation test mentioned above, the temperature was lowered from 80 ° C to 40 ° C. The test conditions are as follows: 1-Room temperature 25 ° C / 2- Apply silicone grease directly to the heat sink and processor chip / 3- Raspberry Pi 4 processor overclocking
The final cooling effect may vary depending on the test conditions. Due to shipping restrictions, we did not equip the accessories with silicone grease. If you use the thermal conductive tape in the accessory, you can reduce the temperature from 80 ° C to 48 ° C under the same conditions. It can be seen that the use of silicone grease is better. If you want to achieve the best heat dissipation, we recommend that you purchase silicone grease yourself.
This product does not include the Raspberry Pi, the product image is only for the effect display.
Klikkaa tarkemmat tiedot | |
Valmistaja | Seeed Studio |
Valmistajan malli | 114992048 |
Mitat | 58 x 41 x 35 mm |
Väri | läpinäkyvä |
Yhteensopiva | Raspberry Pi 4 |
Kemo KL001 - Ø0,1mm lakattua kuparilankaa 140m...
5,99 €
Joy-IT RB-Case+13 - kaksitasoinen, avonainen...
6,89 €
10,90 €
1,60 €
7,30 €
0,67 €
0,35 €
6,90 €
0,48 €
1,11 €