Grove

Valmistajat

Erikoistarjoukset

Grove Dust Sensor (PPD42NS) Näytä suurempana

Grove Dust Sensor (PPD42NS)

SEEED 101020012

8 kappaletta

Varastossa

Valmistajan kotisivu

16,68 €

Seeed Studio 101020012 - Grove - Dust Sensor (PPD42NS)

Description

This Dust Sensor gives a good indication of the air quality in an environment by measuring the dust concentration.

Features

  • Wide measurement range: Not only cigarette smoke, but also indoor dust, an asthma trigger, can be detected.

  • Stable and sensitive measurements: dual PWM output for particle sizes over 1 micron and 2.5 microns (approx.)

  • Long-term use: Air is self-priming through the current of the air generating mechanism with built-in heater, easy to maintain

  • Compact and light design, easy to install

  • Easy to use: compatible with Grove port, just plug-and-play

The Particulate Matter level (PM level) in the air is measured by counting the Low Pulse Occupancy time (LPO time) in a given time unit. LPO time is proportional to PM concentration. This sensor can provide reliable data for air purifier systems; it is responsive to PM of diameter 1μm.

Note

This sensor uses a counting method to measure dust concentration, not the weighing method, and the unit is pcs/L or pcs/0.01cf.

Please pay attention to the warnings listed here.

Technical details

Dimensions59mm x45mm x22mm
WeightG.W 28g
BatteryExclude
VCC4.75~5.75V
Standby Current Supply90mA
Detectable range of concentration0~28,000 / 0 ~ 8000 pcs/liter / pcs/0.01cf
Operating Temperature Range0~45 °C
Output MethodNegative Logic, Digital output, High: over 4.0V(Rev.2), Low: under 0.7V
Detecting the particle diameter>1μm
Dimensions59(W) × 45(H) × 22(D) mm
Humidity Range95% rh or less

Application Ideas

  • Air Purifier

  • Air Quality Monitor

  • Air Conditioner

  • Ventilator

Part List

Grove - Dust Sensor1
Grove Cable1

Links

Klikkaa tarkemmat tiedot
ValmistajaSeeed Studio
Valmistajan malli101020012
Mitat59 x 45 x 22 mm

Tätä tuotetta ostaneet ostivat myös:

 
Tuo ostoskori Excel-tiedostosta (.xls) jossa on tuotekoodit ja määrät