Seeed Studio 103020008 - Grove - MOSFET for Arduino
|
Rigol MSO8204A - nelikanavainen...
SEEED 103020008
10 kappale kappaletta
Varastossa
Huom: Viimeinen tuote varastossa!
Tulossa:
Seeed Studio 103020008 - Grove - MOSFET for Arduino
MOSFET stands for metal oxide semiconductor field-effect transistor and it is used to switch or amplify voltages in circuits. The purpose of a MOSFET transistor is essentially to control voltage/current flow between the source and the drain. The working principle differs based on the type of MOSFET.
Grove - MOSFET enables you to control higher voltage projects, say 15VDC, with low voltage, say 5V, on the microcontroller. MOSFET is also a kind of switch, but its switching frequency can reach up to 5MHz, much faster than a normal mechanical relay. There are two screw terminals on the board. One for outer power source and the other for the device you want to control. Grove - MOSFET will pass the power from one end to another when closed. But if the outer power source is absent, your device can still draw power from the microcontroller via the Grove interface.
Dimensions | 40mm x20mm x15mm |
Weight | G.W 14g |
Battery | Exclude |
Working voltage: | 5V |
Vin: | 5 ~ 15V |
MOSFET Model: | CJQ4435 |
Grove - MOSFET | 1 |
Klikkaa tarkemmat tiedot | |
Valmistaja | Seeed Studio |
Valmistajan malli | 103020008 |
Mitat | 40 x 20 x 15 mm |
Paino | 14g |
1,00 €
Feetech FT-MC-004 - Aluminium 4 Wheel Robot...
8,95 €
Kemo S001 - harrastuskäyttöön pussillinen...
4,40 €
7,28 €
0,90 €
0,83 €
1,05 €
Feetech FT-MC-003 - Aluminium 4 Wheel Robot...
6,81 €
6,00 €
Kemo S106 - harrastuskäyttöön lajitelma...
7,70 €