Seeed Studio 101020023 - Grove - Sound Sensor Based on LM358 amplifier - Arduino Compatible
|
Rigol DHO924S - pienikokoinen,...
SEEED 101020023
6 kappale kappaletta
Varastossa
Huom: Viimeinen tuote varastossa!
Tulossa:
Seeed Studio 101020023 - Grove - Sound Sensor Based on LM358 amplifier - Arduino Compatible
Easy project operation: Grove compatible interface
Analog output signal
Wide supply voltage range: 4V-12V
Low quiescent current drain: 4mA
Tiny size: 2.0cm x 2.0cm twig module
Minimum external parts
The Sound sensor module is a simple microphone compatible with many microcontrollers and SBCs like Arduino and Raspberry Pi. It can be used to detect whether there's sound (like the sound of clapping, noise, etc) surround or not and output the sound strength of the environment. This module can easily integrate with logic modules on the input side of Grove circuits and its output is analog. With its tiny size and high performance, it is perfect for your Raspberry Pi audio detection project and interactive project.
Simple microphone
Sound/noise detector
Smart home: Sound control lamp
Sound interactive device
Dimensions | 24mm x20mm x9.8mm |
Weight | G.W 9g |
Battery | Exclude |
Operating Voltage Range | 5 V |
Operating Current(Vcc=5V) | 4~5 mA |
Voltage Gain(V=6V, f=1kHz) | 26 dB |
Microphone sensitivity(1kHz) | 52-48 dB |
Microphone Impedance | 2.2k Ohm |
Microphone Frequency | 16-20 kHz |
Microphone S/N Radio | 54 dB |
Grove - Sound Sensor | 1 |
Klikkaa tarkemmat tiedot | |
Valmistaja | Seeed Studio |
Valmistajan malli | 101020023 |
Seeed Studio 101020005 - Grove - Collision Sensor
12,64 €
2,90 €
Seeed Studio 101020172 - Grove - Line finder...
6,40 €
Elecrow STH01101S - DHT11 Temperature &...
5,10 €
Seeed Studio 103020005 - Grove Relay 5A
6,36 €
Elecrow ACK02124K (without Crowduino) -...
27,40 €
Elecrow CDE20031P - iso RGB LED paneeli Arduino...
64,26 €
1,74 €
0,21 €
Seeed Studio 104020250 - Grove - OLED Display...
22,73 €