PeakTech 1032 VOLTAGE DETECTOR 12-1000V

When the device is switched on, the tip lights up green if no voltage is present. If AC voltage is present at the measuring point, this is visually indicated by a red flashing LED and the integrated buzzer sounds. In addition, a vibration motor ensures the perception of detected voltages even in noisy and unclear working environments.

If the user holds down the 12 V toggle button, the test probe lights up yellow. Now the sensor is more sensitive and the frequency of the acoustic and optical signal changes depending on the distance of the voltage under test. The integrated LED flashlight can be switched on at any time, even if the actual voltage tester is switched off. In addition, the device can be transported practically and safely with the pocket clip.

The ergonomic and modern design, as well as the many practical features and the high user safety with overvoltage category IV 1000 V perfectly round off the profile of the PeakTech 1032 voltage tester.

Features

• yellow LED signals 12 V to 1000 V mode with distance-dependent signal rate
• 100 V to 1000 V mode with reduced sensitivity for pure voltage testing
• with acoustic and visual signal in case of applied voltage
• vibration motor warns of applied voltage
• robust double housing, handy size with pocket clip, fits comfortably in any shirt pocket
• outer surfaces are made of non-conductive material
• integrated flashlight with its own on/off switch
• additional LED in the test probe for test object illumination
• safety: EN 61010-1; CAT IV 1000 V
• accessories: batteries (2x AAA) and operating instructions

Specs

• Ingress protection: IP 67
• LED-lamp: yes
• NCV range: 12 ... 1000 V AC, 100 ... 1000 V AC
• Over voltage category: CAT IV 1000 V
• Vibrationsmotor: yes

Links

• PeakTech_1032_02-2021_DE-EN.pdf