2. Measurement
  3. Current clamps
  4. Hantek CC-65 AC/DC Clamp Current Probe

Current clamps

Manufacturers

Specials

AC/DC current clamp adapter BNC View larger
Previous Next

Hantek CC-65 AC/DC Clamp Current Probe

MJ CC-65

2 Items

In stock

112,50 €

AC/DC Current Clamp, 20kHz Bandwidth, 65A,10mV/A, 100mV/A

Features

AC/DC frequency range: Up to 20 kHz
Effective Measurement Range: 20mA to 65A DC
It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.
Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage. And if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms; If connect to a multimeter by banana type connector, you can obtain the current data. 

Applications

Power circuit measurement and malfunction analysis; 
Motor drive of frequency converter (or other electronics) measurement; 
Power electronics equipments measurement. 

Specifications

DCA Range100mV /A±(1.5%±5mA) 10mA ~ 20A
10mV/A±(2%±20mA) 100mA ~ 40A;
±(4%±0.3A) 40A ~ 65A
ACA Range100mV /A±(2%±30mA) 100mA ~ 10A (40Hz ~ 2KHz);
±(4%±30mA) 100mA ~ 10A (2KHz ~ 10KHz);
±(6%±30mA) 100mA ~ 10A (10KHz ~ 20KHz);
±(8%±30mA) 10A ~ 15A (40Hz ~ 20KHz)
10mV/A±(2%±30mA) 100mA ~ 40A (40Hz ~ 1KHz);
±(4%±30mA) 100mA ~ 40A (1KHz ~ 2KHz);
±(6%±30mA) 100mA ~ 40A (3KHz ~ 5KHz);
±(8%±0.3A) 40A ~ 65A (40Hz ~ 20KHz)
Captured Conductor Size9mm maximum
Low Battery Indictorred LED lighting
Operating Temperature0℃to 50℃70% R.H.
Storage Temperature-20℃ to +70℃, 80% R.H.
Battery Type9V DC
Weight250 gm typical
Dimensions195mm(H) x 70mm(W) x 33mm(D)
OutputSupplied with coil cable with straight BNC plug.

Manual CC-65

Download (286.31k)

Accessories

 
Tuo ostoskori Excel-tiedostosta (.xls) jossa on tuotekoodit ja määrät