- the power wires are soldered to one end of the ribbon
- on the reverse side, a sticker (3M 300LSE) that adheres securely to the surface
- operates on 12VDC (1206 SMD front resistor on tape)
- power consumption: approx. 10,2A per reel / 2A per metre / 30mA per length
- can be cut with scissors into 1,5 cm long pieces of three LEDs
- surface mount LEDs placed on the strip at approximately 5 mm intervals
- total light output of the whole reel 7700lm
- warm white
- wide beam angle: 120°