- the power wires are soldered to one end of the ribbon
- on the reverse side, a sticker (3M 200MP) that adheres securely
- operates on 12VDC (1206 SMD front resistor on tape)
- power consumption: approx. 8A per reel / 1,6A per metre / 40mA per length
- can be cut with scissors into 2,5 cm long pieces of three LEDs
- minimum bending radius 2 cm
- 1206 surface mount LEDs placed on the strip at approximately 8 mm intervals
- total light output of the whole reel 4080lm (600 x 3000mcd)
- warm white = 3500K
- wide beam angle: 120°