- the power wires are soldered to one end of the ribbon
- on the reverse side, a sticker (3M 200MP) that adheres securely
- operates on 12VDC (1206 SMD front resistor on tape)
- power consumption: approx. 6,5A per reel / 1,3A per metre / 50mA per length
- can be cut with scissors into 3,8 cm long pieces of three LEDs
- minimum bending radius 2 cm
- 1206 surface mount LEDs placed on the strip at approximately 13 mm spacing
- total light output of the whole reel 1950lm (390 x 4000mcd)
- cold white = 5500-6500K
- wide beam angle: 120°