Shelly

Manufacturers

Specials

Shelly Plus Add-On

SHELLY PLUSADDON

1 Item

In stock

Warning: Last items in stock!

Manufacturer homepage

25,90 €

Shelly Plus Add-On - Shelly Plus Add-on is a galvanically isolated sensor interface for all Shelly Plus relays.

  • Can be used with up to five DS18B20 sensors or one DHT22 sensor
  • Has one analog and one digital input
  • DS18B20 temperature sensor
    Can be used with up to 5 (not included)
  • DHT22 sensor
    If you want to monitor temperature and humidity (not included)

Precise measurement and control
Shelly Plus Add-on is a galvanically isolated sensor interface for all Shelly Plus relays.
Use the add-on to measure temperature and humidity via its 1-Wire ports, or connect different analog and digital sensors for complex automation and higher efficiency.c

Highly Compatible
The Shelly Plus add-on is compatible with most Arduino sensors!
Use the digital or analog inputs to measure your desired parameters and create complex automation scenes based on sensor data.

Garage door control
You can connect a reed switch sensor to the Shelly Plus Add-on's digital sensor and track the status of your garage door.
This way, you'll always know if it's open or closed and can react accordingly.

Heat your water to an optimal temperature
Meet your daily needs without wasting anything!
Shelly PM relays allow you to determine the optimal amount of energy needed to heat the water in your instantaneous water heater.
When used in conjunction with a temperature sensor, Shelly relays can automatically shut off the instantaneous water heater when the optimum temperature is reached.

Keep the heat in the house
Used in conjunction with an LDR (photoresistor), the Shelly Plus Add-on can cause the Shelly Plus 2PM to close the blinds when direct sunlight shines on your windows and heats up the room.
This way, the air conditioner doesn't have to compensate for the heat by using more electricity, saving energy.
And don't worry about losing the pleasant daylight!
As soon as the sun changes its location, the blinds will automatically open again.

An awning that follows the weather
Motorized outdoor awnings provide your guests with comfortable shade on sunny days.
However, a strong, uncontrolled wind can damage them irreparably. By combining it with a wind sensor connected to the Shelly Plus Add-on, Shelly Plus 2PM can automatically close the outdoor awning to protect it from wind.
In addition, the Shelly Plus Add-on with a rain sensor can cause Shelly Plus 2PM to open the awning in time to protect your guests.

Specifications

PHYSICAL
Size (HxWxD):37x42x15 ±0.5 mm / 1.46 x 1.65 x 0.59 ±0.02 in
Weigh:105 g / 3.70 oz
Shell material:Plastic
Screw terminals max torque:0.1 Nm / 0.89 lbIn
Conductor cross section:max. 1 mm² / 17 AWG
Conductor stripped length:4.5 mm / 0.18 in
Color:Black
ENVIRONMENTAL
Ambient temperature:-20 °C to 40 °C / -5 °F to 105 °F
Humidity30 % to 70 % RH
Max. altitude2000 m / 6562 ft
ELECTRICAL
Power supply voltage AC:N/A
Power supply voltage DC:3.3 V (from Shelly plus device)
Power consumption:< 0.5 W (without sensors)
OUTPUT CIRCUITS RATINGS
VCC max. current:10 mA
VREF OUT max. current:1 mA
VREF+R1 OUT resistor10 k?
SHELLY PLUS DEVICE FIRMWARE CAPABILITIES
Shelly Plus Add-on supporting devices:Shelly Plus 1/1PM , Shelly Plus 2PM, Shelly Plus i4/i4DC
Temperature reading:Depends on the DS18B20 or DHT22 sensors
Humidity reading:Depends on the DHT22 sensor
Digital input:-15 V to 0.5 V (True) / 2.5 V to 15 V (False)*
Analog input range:0 to 100%
Analog input report threshold:1%**
Voltmeter range:0 to 10 V
Voltmeter report threshold:0.1 V**
Analog input / Voltmeter accuracyBetter that 5%
MQTT:Yes
CoAP:No
EAN3800235266427
click for more info
ManufacturerShelly (Allterco Robotics)
Manufacturer's modelShelly Plus Add-On
Measures37 x 42 x 15 mm
Weight105g
Colourblack
Operating temperature-20...+60°C

Customers who bought this product also bought:

 
Tuo ostoskori Excel-tiedostosta (.xls) jossa on tuotekoodit ja määrät