Kemo M195 - PWM Power control 9 - 28 V/DC, max. 20 A
|
KEMO M195
3 Item Items
In stock
Warning: Last items in stock!
Availability date:
Kemo M195 - PWM Power control 9 - 28 V/DC, max. 20 A
Power controller for controlling DC loads (DC motors, light bulbs, heaters, LEDs with current limiting resistors, etc.) The use of PWM (pulse width) control works well even with electric motors running at low RPM. Switching frequency: approx. 300 - 600 Hz (for motors, a humming noise may be heard). The control is via the supplied potentiometer or optional with an external control voltage 0 to 5 V/DC.
Important installation instructions, please note!
Operating voltage | 9 - 28 V/DC |
Max. current carrying capacity | 20 A (if the module is screwed on a cooling plate) |
Control range | approx. 0% to 100% |
Control mode | PWM pulse width modulation with a frequency between 300 - 600 Hz |
Potentiometer | 4,7 k lin (enclosed) |
Permissible loads | direct current motors, incandescent lamps, heatings, LEDs with protective resistors. Current consumption up to max. 20 A in each case. |
Dimensions | approx. 87 x 60 x 33 mm (with mounting bottom) |
EAN | 4024028031958 |
click for more info | |
Manufacturer | Kemo Electronic |
Manufacturer's model | M195 |
Measures | 87 x 60 x 33 mm |
11,60 €
2,05 €
1,03 €
0,39 €
14,22 €
1,36 €
0,21 €
Raspberry Pi 4 Model B SBC with two gigabytes...
70,80 €
Elecrow CT009559T - Crowtail- Thermocouple...
14,83 €
Elecrow CPC03044C - 4 Pin Crowtail Cable (5 PCS)
3,34 €