Seeed Studio 104020208 - Grove - OLED Display 0.96" (SSD1315) I2C Interface Compatible with Arduino
|
Rigol MSO8074A - Four-channel mixed...
SEEED 104020208
4 Item Items
In stock
Warning: Last items in stock!
Availability date:
Seeed Studio 104020208 - Grove - OLED Display 0.96" (SSD1315) I2C Interface Compatible with Arduino
The Grove - OLED Display 0.96" (SSD1315) is a monochrome(white) 128×64 pixels passive display matrix module with Grove I2C Interface. The new 0.96 OLED Display is the upgrade version of the old Grove - OLED Display 0.96". It inherits the old version with high contrast, high brightness, low power consumption, wide viewing angle, and many other advantages.
Thanks to the new SSD1315 chip, it can work with 3.3V, so we removed the expensive DC-DC boost circuit. And with the onboard level shift circuit, the new Grove - OLED Display 0.96" can work with 3.3V and 5V platforms. That is to say, you can use it easily as an Arduino OLED display, Raspberry Pi OLED display, etc.
As for software compatibility, this Grove-OLED Display supports the U8g2 monochrome displays library written by Olikraus. This library is so convenient and well-compatible that it can support not only this display based on SSD1315 but also displays equipped with SSD1306 or many other chips. So buy one Grove - OLED Display 0.96" (SSD1315) and get quickly started with the U8g2 library, you will find magic in this little screen!
Note! If your board is ATmega328, such as Seeeduino V4.2 and Arduino UNO, you need to change to soft I2C when using the U8G2 library.This is not required if you are using a SAMD development board.
Parameter | Value |
Input voltage | 3.3V / 5V |
Output Voltage | 0 ~ 2.3V |
Pixels | 128 x 64 |
Temperature Range | -40℃ ~ +85 ℃ |
Interface | I2C/Digital |
click for more info | |
Manufacturer | Seeed Studio |
Manufacturer's model | 104020208 |
Operating temperature | -40...+85°C |
Compatible | Arduino |
Seeed Studio 110990064 - Grove - Universal 4...
7,90 €
7,30 €
Seeed Studio 103100124 - Grove Shield for...
7,30 €
Joy-IT SBC-BUCK02 - DC/DC step down voltage...
18,90 €
Arduino Shield L298P Motor Driver with GPIO
21,83 €
STM32F103C8T6 Blue Pill Arduino Compatible Board
21,48 €
7,30 €
13,20 €
6,90 €
Seeed Studio 104020108 - Grove - WS2813 RGB LED...
15,30 €