Seeed Studio 101020023 - Grove - Sound Sensor Based on LM358 amplifier - Arduino Compatible
|
SEEED 101020023
6 Item Items
In stock
Warning: Last items in stock!
Availability date:
Seeed Studio 101020023 - Grove - Sound Sensor Based on LM358 amplifier - Arduino Compatible
Easy project operation: Grove compatible interface
Analog output signal
Wide supply voltage range: 4V-12V
Low quiescent current drain: 4mA
Tiny size: 2.0cm x 2.0cm twig module
Minimum external parts
The Sound sensor module is a simple microphone compatible with many microcontrollers and SBCs like Arduino and Raspberry Pi. It can be used to detect whether there's sound (like the sound of clapping, noise, etc) surround or not and output the sound strength of the environment. This module can easily integrate with logic modules on the input side of Grove circuits and its output is analog. With its tiny size and high performance, it is perfect for your Raspberry Pi audio detection project and interactive project.
Simple microphone
Sound/noise detector
Smart home: Sound control lamp
Sound interactive device
Dimensions | 24mm x20mm x9.8mm |
Weight | G.W 9g |
Battery | Exclude |
Operating Voltage Range | 5 V |
Operating Current(Vcc=5V) | 4~5 mA |
Voltage Gain(V=6V, f=1kHz) | 26 dB |
Microphone sensitivity(1kHz) | 52-48 dB |
Microphone Impedance | 2.2k Ohm |
Microphone Frequency | 16-20 kHz |
Microphone S/N Radio | 54 dB |
Grove - Sound Sensor | 1 |
click for more info | |
Manufacturer | Seeed Studio |
Manufacturer's model | 101020023 |
Seeed Studio 103030275 - Grove Base Hat for...
18,40 €
Seeed Studio 114020121 - 3-Axis Digital...
7,30 €
3,90 €
2,70 €
Seeed Studio 107020000 - Grove - Piezo...
4,20 €
Elecrow ACK02124K (without Crowduino) -...
27,40 €
Seeed Studio 101020063 - Grove - Sound Sensor/...
11,37 €
1,57 €
0,17 €
1,74 €