Seeed Studio 101020011 - Grove - Temperature & Humidity Sensor (DHT11)
|
Rigol DSG836A - RF Signal Generator...
SEEED 101020011
2 Item Items
In stock
Warning: Last items in stock!
Availability date:
Seeed Studio 101020011 - Grove - Temperature & Humidity Sensor (DHT11)
Grove - DHT11 Temperature & Humidity Sensor is a high quality, low-cost digital temperature, and humidity sensor based on the DHT11 module.
DHT11 is the most common temperature and humidity module for Arduino and Raspberry Pi. It is widely favored by hardware enthusiasts for its many advantages such as low power consumption and excellent long-term stability. Relatively high measurement accuracy can be obtained at a very low cost. The single-bus digital signal is output through the built-in ADC, which saves the I/O resources of the control board.
On top of that, Grove - Temperature & Humidity Sensor uses the upgraded version of DHT11. The new version of the DHT11 module replaces resistive humidity components with capacitive humidity components. The temperature and humidity measurement range are wider. The temperature resolution is higher. You can check the following figure for more detail.
Dimensions | 40mm x20mm x8mm |
Weight | G.W 10g |
Battery | Exclude |
Input Voltage | 3.3V & 5V |
Measuring Current | 1.3 - 2.1 mA |
Measuring Humidity Range | 5% - 95% RH |
Measuring Temperature Range | -20 - 60 ℃ |
Grove - Temperature & Humidity Sensor | 1 |
Grove Cable | 1 |
click for more info | |
Manufacturer | Seeed Studio |
Manufacturer's model | 101020011 |
8,80 €
3,20 €
Seeed Studio 101020054 - Grove - ADXL345 -...
19,13 €
Seeed Studio 101020793 - Grove - Digital PIR...
8,24 €
1,20 €
Raspberry Pi Pico is a low-cost,...
9,60 €
A RISC-V powered portable soldering iron...
61,60 €
Seeed Studio 313070005 - Small Solar Panel...
9,60 €
Pimoroni PIM548 - Give your Raspberry Pi Pico...
23,25 €
15,58 €