CANBed FD - Arduino CAN-FD Development Kit

Reference: SEEED 102991442

PRODUCT DETAILS

Features

Compact size design: 56x41mm overall dimension
Support two CAN protocols: CAN-FD and CAN 2.0
High-performance CAN Bus chip: MCP2517FD as CAN controller and MCP2542 (MCP2557) as CAN receiver
Flexible CAN Interface: Industrial standard 9-pin sub-D connector or 4-pin terminal, 2 x 4-Pin Grove connectors Compatible with the Grove ecosystem
Wide power input range from 7-28V and stable 5V/1A output

Description

CANBed FD is a CAN FD dev board with an Atmega32U4 microcontroller inside, which has 32KB of Flash and 2.5KB of RAM. The operating frequency is 16MHz, which can meet most embedded applications. There's an Arduino Leonardo bootloader inside the Atmega32U4. If you have used the Arduino IDE, programming will not be a problem for you.

CANBed FD uses MCP2517FDas CAN controller and MCP2542 (MCP2557) as CAN receiver, which are high-performance CAN Bus chips, that can work in both CAN 2.0 and CAN FD protocols at the same time. There is a Micro USB connector on the board, through which you can program the board or supply power to the board. There is one I2C, one UART, one SPI interface, 3 analog input interfaces, and 8 digital IO on the board.

This CANBed-FD Arduino CAN-FD Development Kit adopts MCP2517FD CAN Bus controller with SPI interface and MCP2542FD CAN transceiver to achieve the CAN-BUS capability. With an OBD-II converter cable added on and the OBD-II library imported, you are ready to build an onboard diagnostic device.

What's more, the is an ATmega32U4 with Arduino Leonardo bootloader on the board, you can use Arduino IDE to program the board easily.

Learn more about CAN-BUS here.