|
Seeed Studio 110010044 - Seeed Studio...
PKW-LIGHT-K6 0.5 GE
SLIM® CAT6 Patchcords ROUND design - U/UTP unshielded - 0,5m yellow
PKW-TOUGH-STP-K6 0.5 BL
SLIM® CAT6 Patchcords FLAT design with Nylon sheath - U/FTP shielded - 0,5m blue
PKW-LIGHT-STP-K6 0.5 SW
SLIM® CAT6 Patchcords ROUND design - U/FTP shielded - 0,5m black
ARD SHIELD3AMOTOR
Cytron SHIELD-3AMOTOR - 1.2Amp 7V-30V DC Motor Driver Shield for Arduino (2 Channels)
ARD AKX00032
Original Arduino® AKX00032 - Portenta Machine Control is specifically designed for industrial applications such as automation, plant control, equipment control and robotics. It is easy to use and its versatility allows the design and implementation of complex industrial applications.
SHELLY RGBW2
Shelly RGBW2 - controller relay for Wi-Fi. RGBW 2 converts your LED light bulb or LED lamp into a smart one, which can then be controlled from your phone or tablet.
SHELLY HTB
Shelly H&T black - temperature and humidity sensor, black. The Shelly H&T helps to monitor changes in humidity and temperature while helping to avoid dehydration. Connects to a wireless Wi-Fi network. Can be used in controls and automation with other devices.
PR1KCS28
Teltonika PR1KCS28 - Combo SISO Mobile/GNSS/Wi-Fi Roof SMA Antenna is a multi-purpose antenna designed for use with Teltonika routers. The antenna provides a combined single frequency antenna covering mobile, GNSS and Wi-Fi networks.
ARD A000052
Original Arduino® A000052 - The Arduino Leonardo uses Atmel's ATmega32u4 microcontroller. This model does not include presoldered pin headers.
ARD ABX00062
Arduino ABX00062 - The Arduino UNO Mini Limited Edition measures just 26.7 x 34.2 mm, with USB-C as the programming interface and the good old ATmega328P surface mount version as the processor.
WKK 211111340915
WKK 211111340915 - H-1 2:1 105C 25.4/12.7mm - transparent heat shrink tube in a box, length 5m
WKK 21111242915
WKK 21111242915 - H-1 2:1 105C 1.6/0.8mm - transparent heat shrink tube in a box, length 10m
WKK 21111342915
WKK 21111342915 - H-1 2:1 105C 2.4/1.2mm - transparent heat shrink tube in a box, length 10m
WKK 21111442915
WKK 21111442915 - H-1 2:1 105C 3.2/1.6mm - transparent heat shrink tube in a box, length 10m
WKK 2111840015
WKK 2111840015 - H-2(Z) 2:1 125C 9.5/4.8mm - black heat shrink tube in a box, length 5m
WKK 21814421015
WKK 21814421015 - H-2F(YG) 2:1 135C 3.2/1.6mm - yellow-green heat shrink tube in a box, length 10m
TAEHG
Vention TAEHG - USB 2.0 C/C cable with nylon braided TPE jacket, supports 5A and 100W fast charging, colour black, length 1,5m.
W41483
Wiha 00923 - 10 piece ball end hexagon set, Wiha ErgoStar brilliant coloured.
PIM082
Pimoroni PIM082 - Explorer HAT Pro adds a lot of useful tools to your Raspberry Pi.
PEAK 5186
PeakTech® P 5186 - New and practical USB data logger for DC voltage measurement with LCD display. Memory holds 32000 measurement point.
PEAK 1090
PeakTech® P 1090 - two pin voltage tester for DC and AC voltages from 6 to 690 volts for fast, quick and uncomplicated voltage measurements. This model is TÜV/GS tested for specific user safety and features an easy-to-read LCD display with backlight and bar graphs.
PEAK 1096
PeakTech® P 1096 - is a new development for fast and uncomplicated voltage measurements as a two-pole voltage tester with digital LCD display and additional LED display of the current voltage values. This model has been tested by TÜV / GS for special user safety and has an easy-to-read LCD display with backlight for a precise indication of the voltage...
CQDBC
Vention CQDBC - USB 2.0 A/microB cable with TPE jacket, supports 2A fast charging, colour black, length 0,25m. Special adapter for USB-C devices.
SHELLY PRO 1PM
Shelly Pro 1PM - is a Wi-Fi relay with single-phase energy consumption measurement, supporting a maximum load of 16 A and mounts directly on a DIN rail.
KTR 5038
Kitronik 5038 - Monitor, log, and react to gathered sensory data with the Kitronik Air Quality Control HAT for Raspberry Pi.
SHELLY PRO 2
Shelly Pro 2 - is a 2-phase Wi-Fi relay that supports a maximum load of 25 A (16 A per channel). Directly mountable on a DIN rail.
WKK 111053071
WKK 111053071 -black screw-on fastener for 4,8mm cable ties with Ø4,5mm mounting hole, 100pcs per bag.
WKK 28113101
WKK 28113101 - H-2(Z) 2:1 125C - assortment of shrink films in storage box, 9 different sizes, 465 pieces in total.
FMM130
Teltonika FMM130 - GNSS and GSM connected positioning head that can collect the coordinates of the device and transmit them via GSM network to a server.
FMM230
Teltonika FMM230 - is a GNSS- and GSM-connected positioning head that can collect the coordinates of the device and transmit them via GSM network to a server. It attaches directly to the battery using the fork connectors included in the package.
PHR-3+JOHTO UROS
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end
WKK 273015102
WKK 273015102 HLB 320 - Heat shrinkable cable breakout 1-to-2
WKK 50013M20BSSW
WKK 50013M20BSSW - Black M20 plastic cable glands with bending protection, thread length 11mm. 50pcs bag
WKK 50620PA7035
WKK 50620PA7035 - Light grey plastic cable glands M20, thread length 8mm. 100pcs bag
WKK 50625PA7035
WKK 50625PA7035 - Light grey plastic cable glands M25, thread length 8mm. 50pcs bag
PIM550
Pimoroni PIM550 - Transform your Raspberry Pi Pico into a electronic adventure playground packed with physical computing goodies including an LCD screen, motor drivers, a mini breadboard, and much more!
PR1KC640
Teltonika PR1KC640 - Teltonika 5G antenna for roof top installation e.g. on the roof of a car. Compatible with RUTX50 and TRB500.
PEAK 4200
PeakTech® 4200 - Current clamp adapter for multimeters 200A AC, ratio 1000:1
PEAK 3433
PeakTech® 3433 - Digital wall scanner for finding wood, metal and live wires.
AIRAM 2442646
Airam 2442646 - Earthed 4-way extension cord with a switch and an indicator light. Length 1,5 meters.