Seeed Studio 106990290 - The Lipo Rider Plus from Seeed is not only a Fast Charger but also a Strong PowerBoost.
|
SEEED 106990290
6 Item Items
In stock
Warning: Last items in stock!
Availability date:
Seeed Studio 106990290 - The Lipo Rider Plus from Seeed is not only a Fast Charger but also a Strong PowerBoost.
ATTENTION! Make sure you use a built-in battery protector for your lithium battery or that you can connect a separate battery protector, otherwise it may overcharge or over-discharge the battery.
Welcome to the era of fast charging! 5V/2A Lipo Rider Plus will greatly increase the charging speed, just like flashing lightning.
The Lipo Rider Plus from Seeed is not only a Fast Charger but also a Strong PowerBoost, supports up to 5V/2A charging current, boost output integration, output up to 5V/2.4A, can also output 3.3V /250mA. The 3.3V output is normally on, and the 5V output supports IO control or manual switch, which means you can use 3.3V to supply power for a microcontroller and use the I/O of this microcontroller to control the 5V output, totally programmable.
Of course, Lipo Rider Plus can charge the Lipo battery, and it is very fast, 5V/2A, 10W charging power, what a flying experience.
Not only a charger but also a power supply and a booster. With the help of Lipo Rider Plus, you can input a 3.7V lipo battery, and output up to 5V/2.4A via the USB Type-A port. With the on-board switch, you can control the ON/OFF of USB port easily. Meanwhile, we provide the full function pin header, which can output 3.3V/250mA as well.
click for more info | |
Manufacturer | Seeed Studio |
Manufacturer's model | 106990290 |
Pimoroni PIM557 - This SHIM provides a...
14,23 €
Joy-IT SBC-RFID-CARD - A set of 5 plain RFID...
5,42 €
7,10 €
0,39 €
5,17 €
0,50 €
29,30 €
7,70 €
LOW ESR Electrolytic Capacitor 100µF 16V, THT...
0,40 €
Raspberry Pi Pico W is a low-cost,...
13,30 €