|
Original Arduino® AFX00006 - Arduino...
KYT JOY01
Joy-IT Joystick - a large joystick for arcade game projects. Four micro switches pre-installed.
LCD 2X16-I2C
Joy-IT SBC-LCD16x2 - 16x2 LCD module with I2C interface.
LCD 4X20-I2C
Joy-IT SBC-LCD20x4 - I2C Serial 20x4 2004 LCD Module
LCD RBTFT18
Joy-IT RBTFT18 - SPI bus controlled touch screen small TFT display. Size 1.8 inches, resolution 128x160 pixels, 262k colors. Suitable for Arduino and Raspberry projects.
LCD RBTFT18T
Joy-IT RB-TFT1.8-T - SPI bus controlled small TFT display. Size 1.8 inches, resolution 128x160 pixels, 262k colors, resistive touch screen. Suitable for Arduino and Raspberry projects.
LCD SBC01
Joy-It SBC-LCD01 - This IPS TFT display is controlled via SPI. This makes it suitable for use as an output device for microcontrollers (e.g. NodeMCU) and single-board computers (e.g. Raspberry Pi). By using a high-resolution IPS panel with a pixel density of over 260 PPI, content can be displayed in high-resolution on the compact display.
LCD SBC84X48
Joy-IT SBC-LCD84x48 - SPI bus controlled small graphic LCD display, the same as the one used in the Nokia 5110 phones. Resolution 86x48 pixels, monochrome. Based on PCD8544 driver chip.
MOT N20300W
Joy IT COM-Motor03 - This small metal gear motor is very sturdy and versatile. It is 6Vdc operated and at 160mAh it can reach up to 300 revolutions per minute. The included wheel with rubber profile is mounted in an instant on the built-in shaft.
RPI ALUCASE406
Joy-IT RB-AlucaseP4+06 - Aluminium case for wall mounting Raspberry Pi 4 Model B, with Vesa compatible.
RPI ALUCASE407F
Joy-IT RB-AlucaseP4+07FAN - This high-quality, aluminium-based case protects your Raspberry Pi 4 B not only against exterior shocks but also against interior excessive heat development. The channel milling, combined with the dual fans offers best cooling performance. That's why it is perfect even for extreme settings and environments.
RPI ALUCASE408
Joy-IT RB-AlucaseP4+08 - This aluminium case in a precious design is very robust and protects your Raspberry Pi 4 B perfectly against outer influences. There are cut-outs for all interfaces to make them accessible. The channel milling at the top side serves as a heat sink and inside the housing the case is in direct contact with the CPU and the RAM to...
RPI CASE12
Joy-IT RB-Case+12 - Acryl case for Raspberry Pi 4 Model B
RPI CASE13
Joy-IT RB-Case+13 - Acrylic case for Raspberry Pi
RPI CASE401
RB-CaseP4+01 - Transparent acrylic case for Raspberry Pi 4 model B. It protects the Raspberry optimal and leaves the connections perfectly accessible. It consists of high-quality transparent acryl and high-quality spacers out of brass and has got venting holes on the topside.
RPI CASE403B
Joy-IT RB-CaseP4+03B - Robust plastic case for your Raspberry Pi 4B. Thanks to the strong magnets in the upper, middle and lower part of this case, screw-less mounting is possible and the cover can be removed at any time. It can be assembled in a few steps and the magnetic lock provides easy access to the GPIO pins and your device at any time.
RPI CASE407
Joy-IT RB-CASEP4+07 - Plastic DIN rail case for Raspberry Pi 4 B.
RPI CASEA01
Joy-IT RB-CaseA+01 - This case is a practical "home" for your Raspberry Pi® 3A +.
RPI DINKOT 7
Joy-IT rb-case+07 - Mounting a Raspberry Pi system inside an equipment rack is easy with this housing by Joy-IT. Upon keeping all ports accessible, it can accommodate add-on boards along with the mainboard, and there's a transparent door for quick access to the components as well.
RPI EXPLORER700
Joy-IT RB-Explorer700 - multifunctional hat for Raspberry Pi 4 mini computers.
RPI JOY PS2X
Joy-IT SBC-WLGamepad - Playstation 2 style wireless gamepad that works with 2.4 GHz and has a coverage of up to 8 meters
RPI JOY ZDE
Joy-IT SBC-ZDE - Zero Delay Encoder offers an easy way to connect your own arcade joysticks and buttons and connect them to your PC or other devices.