|
Rigol DHO924S - small sized portable...
SEEED 103020027
Seeed Studio 103020027 - Grove - Mega Shield v1.2 is a extension board for Arduino Mega and Google ADK
SEEED 103020132
Seeed Studio 103020132 - Grove - 2-Channel SPDT Relay
SEEED 103020133
Seeed Studio 103020133 - Grove - 4-Channel SPDT Relay has four single pole / double throw (SPDT) switches. It only requires low-voltage and low current signals to control those switches.
SEEED 103020135
Seeed Studio 103020135 - Grove - 4-Channel Solid State Relay
SEEED 103020136
Seeed Studio 103020136 - Grove - 8-Channel Solid State Relay
SEEED 103020137
Seeed Studio 103020137 - Grove - Solid State Relay V2 (G3MC202P)
SEEED 103020272
Seeed Studio 103020272 - Grove - I2C Hub (6 Port) is an I2C expansion interface board
SEEED 103020293
Seeed Studio 103020293 - Grove - 8 Channel I2C Multiplexer/I2C Hub (TCA9548A)
SEEED 103020312
Seeed Studio 103020312 - Grove Shield for Seeeduino XIAO - with embedded battery management chip
SEEED 103030000
Seeed Studio 103030000 - Grove Base Shield V2.0 for Arduino
SEEED 103030005
Seeed Studio 103030005 - SD Card Shield V4
SEEED 103030009
Seeed Studio 103030009 - Relay Shield v3.0 - The Relay Shield provides four high-quality relay that can control high current loads to Arduino / Seeeduino boards. The onboard NO (Normally Open) / NC (Normally Closed) interface could be a nice solution for controlling devices that could not be directly controlled by Arduino's Digital I/Os.
SEEED 103030021
Seeed Studio 103030021 - W5500 Ethernet Shield - Supports Hardwired TCP/IP Protocols : TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE. Compatible with standard Arduino/Seeeduino boards Micro-SD card socket for expanding storage. Two built-in Grove connectors for I2C and UART.
SEEED 103030215
Seeed Studio 103030215 - CAN-BUS Shield V2 adopts MCP2515 and MCP2551
SEEED 103030216
Seeed Studio 103030216 - ReSpeaker 4-Mic Array for Raspberry Pi
SEEED 103030275
Seeed Studio 103030275 - Grove Base Hat for Raspberry Pi
SEEED 103030276
Seeed Studio 103030276 - Grove Base Hat for Raspberry Pi Zero, with 12-bit ADC
SEEED 103030279
Seeed Studio 103030279 - 4-Channel 16-Bit ADC for Raspberry Pi (ADS1115)
SEEED 103030280
Seeed Studio 103030280 - 8-Channel 12-Bit ADC for Raspberry Pi
SEEED 103030296
Seeed Studio 103030296 - 2-Channel CAN-BUS(FD) Shield for Raspberry Pi
SEEED 103030356
Seeed Studio 103030356 - Seeeduino XIAO expansion board with rich set of peripherals including OLED, RTC, expandable memory, passive buzzer, RESET/User button, 5V servo connector, multiple data interfaces…
SEEED 103060001
reTerminal E10-1 - Expansion Board supports DC Jack/PoE/UPS, Gigabit Ethernet, LTE/4G/5G/LoRaWAN, RS485/232, CAN, SATA 2.0
SEEED 103100063
Seeed Studio 103100063 - Grove Shield for micro:bit v2.0
SEEED 103100124
Seeed Studio 103100124 - Grove Shield for Arduino Nano
SEEED 103100142
Seeed Studio 103100142 - Grove plug-and-play shield for Raspberry Pi Pico which integrates with various kinds of Grove connectors, such as I2C, UART, Digital, Analog ports.
SEEED 103100163
Seeed Studio 103100163 - Ochin Tiny Carrier Board for Raspberry Pi Compute Module 4
SEEED 103110042
Seeed Studio 103110042 - Raspberry Pi Router Board for CM4 module (with two full-speed gigabit network ports, low cost, Wifi and working as a router with Openwrt)
SEEED 103990363
Seeed Studio 5035890 - If we want the computer to communicate with the MCU, we need this RS-232 To TTL Conveter (MAX3232IDR).
SEEED 103990383
Seeed Studio 103990383 - This is an industrial USB to RS232/485/TTL isolated converter with original FT232RL inside
SEEED 103990563
Seeed Studio 103990563 - 2-Channel CAN-BUS(FD) Shield for Raspberry Pi (MCP2518FD), supports the CAN FD protocol and supports transmission speed up to 8 Mbps.
SEEED 103990564
Seeed Studio 103990564 - Wio Terminal Chassis - Battery (650mAh)
SEEED 103990623
Seeed Studio 103990623 - 2.4GHz Rod Antenna for XIAO ESP32C3 mini antenna for a tiny Seeed Studio XIAO ESP32C3 microcontroller board.
SEEED 104020006
Seeed Studio 104020006 - Grove LED Bar v2.0 - 10 Leds Arduino Library Easy-to-Use
SEEED 104020048
Seeed Studio 104020048 - Grove – Chainable RGB Led V2.0
SEEED 104020108
Seeed Studio 104020108 - Grove - WS2813 RGB LED Strip Waterproof, 30LED/m, 1m, is a Grove compatible LED strip. It can be lighted by Grove interface. RGB WS2813 is widely used in LED, it can change many colors and is programmable.
SEEED 104020111
Seeed Studio 104020111 - Grove - 16x2 LCD (White on Blue) for Arduino and Raspberry Pi
SEEED 104020113
Seeed Studio 104020113 - Grove - 16 x 2 LCD (Black on Yellow) for Arduino and Raspberry Pi
SEEED 104020129
Seeed Studio 104020129 - Grove - Triple Color E-Ink Display 1.54''
SEEED 104020131
Seeed Studio - Grove - RGB LED Stick (10 - WS2813 Mini)
SEEED 104020133
Seeed Studio 104020133 - Grove - 0.54‘’ Red Quad Alphanumeric Display
SEEED 104020208
Seeed Studio 104020208 - Grove - OLED Display 0.96" (SSD1315) I2C Interface Compatible with Arduino
SEEED 104020249
Seeed Studio 104020249 - Grove - OLED Yellow&Blue Display 0.96 (SSD1315) - SPI/IIC -3.3V/5V
SEEED 104020250
Seeed Studio 104020250 - Grove - OLED Display 1.12 (SH1107) V3.0 - SPI/IIC -3.3V/5V
SEEED 104030001
Seeed Studio 104030001 - Grove - 16X2 LCD RGB Backlight - Full Color Display
SEEED 104030003
Seeed Studio 104030003 - Grove - 4-Digit Display is a red alpha-numeric Grove compatible display with 8 adjustable luminance levels
SEEED 104030005
Seeed Studio 104030005 - Grove Red LED is a general-purpose LED module in Grove form factor.
SEEED 104030007
Seeed Studio 104030007 - Grove Green LED is a general-purpose LED module in Grove form factor.
SEEED 104030008
Seeed Studio 104030008 - Grove - OLED Display 0.96" - 128×64 dot resolution display I2C Grove interface
SEEED 104030009
Seeed Studio 104030009 - Grove White LED is a general-purpose LED module in Grove form factor.