No products
Filter by
-
Arduino Nano RP2040 Connect with headers (ABX00053)
Original Arduino® ABX00053 - Arduino...
34,42 € -15% 40,50 €
HATs for Raspberry Pi single board computers.
SBC addon boards There are 105 products.
HATs for Raspberry Pi single board computers.
5,81 € In StockRASPBERRY PI 400 GPIO Expansion Board
RPI RAP40020P
Elecrow RAP40020P - Raspberry Pi 400 GPIO header adapter/header expansion, 2x20PIN header.
5,81 €
38,45 € In Stock
25,86 € In StockJoy-IT RASPBERRY PI400 GPIO LLC
RPI RBLLC
Joy-IT RPI RBLLC - voltage level adapter for Raspberry Pi 400 GPIO interface.
25,86 €
18,42 € In Stock4tronix RoboHAT2 RASPBERRY PI MOTOR...
RPI ROBOHAT2
4tronix RoboHAT2 Robot Controller for Raspberry Pi
18,42 €
19,03 € In StockCytron Robo Pico
RPI ROBOPICO
Cytron ROBO-PICO - Designed to integrate effortlessly with the Raspberry Pi Pico and Pico W, it’s equipped with a 2-channel DC motor driver, 4 servo motor ports, and 7 Grove I/O connectors.
19,03 €
21,33 € In StockRASPBERRY ZERO HAT Ethernet (ENC28J60)
RPI RPA01921N
Elecrow RPA01921N - Raspberry Pi Zero ENC28J60 Network Adapter Module
21,33 €
43,23 € In StockStepper Motor HAT for Raspberry Pi
RPI RPA20089H
Elecrow RPA20089H - Stepper Motor HAT for Raspberry Pi
43,23 €
44,10 € In StockPoE Hat for Raspberry Pi 4/3B+
RPI RPA20901S
Waveshare PoE HAT (B) - Power over Internet (POE) Hat for Raspberry Pi 4/3B+
44,10 €
44,70 € In StockRaspberry Pi Zero/Banana Pi M2 Zero ADAPTER
RPI RPA82315A
Elecrow RPA82315A - This adapter board can perfectly convert Raspberry Pi to Raspberry Pi 4B form factor and Raspberry Pi zero to Raspberry Pi 4b.
44,70 €
63,43 € In StockUSB3.0 to 2.5" SSD Expansion board for RPi4B
RPI RPI2P5X825
Cytron RPI-2P5-X825 - Geekworm X825 V2.0 - USB3.0 to 2.5" SSD Expansion board for Raspberry Pi 4 Model B
63,43 €
43,27 € Out of stock
32,39 €
17,39 € In Stock
38,36 € In StockRaspberry Pi IQaudio Codec Zero
RPI SC0366
IQaudio Codec Zero is a Raspberry Pi Zero-sized audio I/O add-on board. It delivers bi-directional digital audio signals (I2S) between Raspberry Pi Zero and its onboard Dialog Semiconductor DA7212 codec. Codec Zero supports a range of input and output devices, from the built-in MEMS microphone to external mono electret microphones and 1.2W, 8Ω mono...
38,36 €
49,84 € Out of stockRaspberry Pi IQaudio DAC+
RPI SC0368
IQaudio DAC+ is an audio output HAT for all generations of Raspberry Pi from Raspberry Pi 1 Model B+ onwards, and supports 24‑bit 192kHz high-resolution digital audio. It uses the Texas Instruments PCM5122 DAC to deliver stereo analogue audio to a pair of phono connectors, and also supports a dedicated headphone amplifier.
49,84 €
59,01 € In StockRaspberry Pi IQaudio DAC Pro
RPI SC0369
IQaudio DAC Pro is the highest-fidelity audio output HAT from Raspberry Pi. Full HD audio output to line RCA or head phones.
59,01 €
59,12 € In StockRaspberry Pi IQaudio DigiAMP+
RPI SC0370
IQaudio DigiAMP+ uses the high-performance DAC from Texas Instruments' TAS5756M stereo amplifier to deliver a direct connection to passive stereo speakers at up to 2 × 35 Watts/channel with variable output. Ideal for a Raspberry Pi-based hi-fi system.
59,12 €
27,31 € In Stock
92,37 € In Stock
52,58 € In StockRASPBERRY PI StromPI V3 Battery Hat 3,2V 1Ah
RPI STROMPI3BAT
Joy-IT RB-StromPI3BAT - Battery Unit for StromPI 3
52,58 €
72,71 € In StockRASPBERRY PI StromPi V3 BATTERY 3,2V 2Ah
RPI STROMPI3BAT-XL
Joy-IT RB-StromPi3BAT-XL - Extra large Battery Pack for StromPi V3 Raspberry Pi hat.
72,71 €
33,40 € Out of stock
60,00 € In StockRaspberry Pi 4B M.2 Expansion board
RPI VMD2X862
Cytron V-MD2-X862 - Geekworm X862 V2.0 - Raspberry Pi 4 Model B M.2 Expansion board
60,00 €
34,37 € In StockRaspberry Pico WIZnet Ethernet HAT
RPI W5100 WIZNET
WIZnet W5100S-EVB-Pico - The W5100S-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W5100S - and basically works the same as the Raspberry Pi Pico board but with additional Ethernet via W5100S.
34,37 €
25,67 € In StockRASPBERRY PI HAT Lora RFM95 IOT Board
RPI WIR01323B
Elecrow WIR01323B - Lora RFM95 IOT Board for RPI
25,67 €
118,42 € In StockRaspberry Pi AI Kit for Pi 5
RPI5 AIKIT
The Raspberry Pi AI Kit bundles the Raspberry Pi M.2 HAT+ with a Hailo AI acceleration module for use with Raspberry Pi 5. I
118,42 €
30,37 € Out of stockRaspberry Pi M.2 HAT+ for Pi 5
RPI5 M2HATPLUS
The Raspberry Pi M.2 HAT+ enables you to connect M.2 peripherals such as NVMe drives and AI accelerators to Raspberry Pi 5’s PCIe 2.0 interface
30,37 €
79,22 € In StockRPI CM4 2x GigaEthernet Carrier Board
SEEED 102110497
Seeed Studio 102110497 - Dual Gigabit Ethernet Carrier Board for Raspberry Pi Compute Module 4
79,22 €
51,10 €Wio Terminal: ATSAMD51, BLE, WiFi
SEEED 102991299
Seeed Studio 102991299 - Wio Terminal: ATSAMD51 Core with Realtek RTL8720DN BLE 5.0 Wi-Fi 2.4G/5G Dev Board
51,10 €
36,04 € In StockGrovePi+ Raspberry Pi Hat
SEEED 103010002
Seeed Studio 103010002 - GrovePi+ is add-on board with 15 Grove 4-pin interfaces that brings Grove sensors to the Raspberry Pi. It is the newest version compatible with Raspberry Pi model B/B+/A+/2/3/4 perfectly.
36,04 €
40,10 €ReSpeaker 4-Mic Array for Raspberry Pi
SEEED 103030216
Seeed Studio 103030216 - ReSpeaker 4-Mic Array for Raspberry Pi
40,10 €
18,40 € In StockGrove Raspberry Pi Hat
SEEED 103030275
Seeed Studio 103030275 - Grove Base Hat for Raspberry Pi
18,40 €
11,80 € In StockGrove Raspberry Pi Zero Hat
SEEED 103030276
Seeed Studio 103030276 - Grove Base Hat for Raspberry Pi Zero, with 12-bit ADC
11,80 €
25,74 € Out of stock4-Ch 16-Bit ADC for Raspberry Pi (ADS1115)
SEEED 103030279
Seeed Studio 103030279 - 4-Channel 16-Bit ADC for Raspberry Pi (ADS1115)
25,74 €
17,52 € Out of stock8-Channel 12-Bit ADC for Raspberry Pi
SEEED 103030280
Seeed Studio 103030280 - 8-Channel 12-Bit ADC for Raspberry Pi
17,52 €
49,29 €2-Channel CAN-BUS(FD) Shield for Raspberry Pi
SEEED 103030296
Seeed Studio 103030296 - 2-Channel CAN-BUS(FD) Shield for Raspberry Pi
49,29 €
7,90 € In StockGrove Shield for Pi Pico v1.0
SEEED 103100142
Seeed Studio 103100142 - Grove plug-and-play shield for Raspberry Pi Pico which integrates with various kinds of Grove connectors, such as I2C, UART, Digital, Analog ports.
7,90 €
109,46 € In Stock2-Channel CAN-BUS(FD) Shield for RPi...
SEEED 103990563
Seeed Studio 103990563 - 2-Channel CAN-BUS(FD) Shield for Raspberry Pi (MCP2518FD), supports the CAN FD protocol and supports transmission speed up to 8 Mbps.
109,46 €
45,03 €Raspberry Pi PoE+ HAT (4B/3B+)
SEEED 106990388
Seeed Studio 106990388 - The Raspberry Pi PoE+ HAT is an add-on board for Raspberry Pi computers with PoE pins, compatible with Raspberry Pi 3B+ and Raspberry Pi 4.
45,03 €
18,25 € Out of stockReSpeaker 2-Mics Pi HAT
SEEED 107100001
Seeed Studio 107100001 - ReSpeaker 2-Mics Pi HAT for Raspberry Pi Zero
18,25 €
33,52 € In StockReSpeaker 4-Mic Linear Array Kit for RPI4
SEEED 107990056
Seeed Studio 107990056 - ReSpeaker 4-Mic Circular Array Kit for Raspberry Pi
33,52 €
40,28 € In StockWM1302 Raspberry Pi Hat
SEEED 113100022
Seeed studio 113100022 - WM1302 Raspberry Pi Hat is an add-on expansion board designed specifically for attaching the WM1302 LoRaWAN Gateway module based on SX1302 to Raspberry Pi versions up to Raspberry Pi 4B.
40,28 €
50,10 €Raspberry Pi LoRa/GPS HAT 868/915MHz
SEEED 113990254
Seeed Studio 113990254 - Dragino LoRa/GPS HAT for Raspberry Pi - support 868M frequency
50,10 €
100,20 €LTE Cat 1 Pi HAT (Europe)
SEEED 113990496
Seeed Studio 113990496 - LTE Cat 1 Pi HAT (Europe) for Raspberry Pi 4
100,20 €
12,58 € In StockGrovePi Zero (GrovePi0)
SEEED 114020001
Seeed Studio 114020001 - GrovePi Zero is a breakout board for Raspberry Pi Zero with 40-pin GPIO connector and 6 Grove ports.
12,58 €
12,97 € In StockRaspberry Pi RTC Expansion Module (DS1307)
SEEED 114100001
Seeed Studio 114100001 - Raspberry Pi RTC Expansion Module v1.1
12,97 €
46,86 €Raspberry Pi High-Precision AD/DA Board
SEEED 114990831
Seeed Studio 114990831 - Raspberry Pi High-Precision AD/DA Board
46,86 €
53,96 € In StockRaspberry Pi Compute Module 4 IO Board
SEEED 114992365
Seeed Studio 114992365 - The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4. It allows you to create systems quickly using off-the-shelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB.
53,96 €
35,22 €4-Channel SPDT Relay HAT for Raspberry Pi
SEEED 114992543
Seeed Studio 114992543 - 4-Channel SPDT Relay HAT for Raspberry Pi
35,22 €
7,30 € In Stock